Why Is BILGE-B-DRY Dry Bilge System Important in the Boating Off-Season?

BILGE-B-DRY Dry Bilge System is crucial in the off-season because it prevents moisture buildup that leads to mold, corrosion, and foul odors—especially when your boat is shrink-wrapped or stored!  Here’s why keeping your bilge dry with a system like BILGE-B-DRY matters:

• BILGE-B-DRY prevents mold, mildew and cabin odors. Shrink wrapping traps moisture. While shrink wrapping protects your boat from the elements, shrink wrap isn’t ventilated. Any gaps or leaks allow water in, which can settle in your bilge and create a breeding ground for mold and mildew.

• A dry bilge = a fresh cabin: Removing residual water helps eliminate musty smells and keeps your boat’s interior fresher for spring launching.

• Moisture corrodes metal: Water left in your boat’s bilge can corrode mechanical pumps, fittings, and electrical components over time.

• BILGE-B-DRY removes every last drop of water, reducing the risk of mechanical degradation while your boat sits idle.

• A dry bilge is a diagnostic tool: If water appears in a previously dry bilge, it signals a leak. A leak is harder to detect if water is always present.

• Off-season monitoring: Spotting leaks early prevents surprises when you prepare your boat for spring.

• Dry compartments are easier to clean.  Moisture traps debris and organic matter which can stain or damage surfaces.

• BILGE-B-DRY simplifies maintenance by complementing your winterizing routine by keeping your bilge clean and dry.

What does your winterizing checklist look like with BILGE-B-DRY integration and dry bilge maintenance?

1. Prep your bilge area first:

• Clean out debris: Remove leaves, oil, and any standing water.

• Inspect for leaks: Check hoses, fittings, and thru-hulls for signs of seepage.

• Dry manually: Use a sponge or wet-vac to remove excessive water before installing BILGE-B-DRY

2. Install BILGE-B-DRY:

• Place the pump in the lowest part of your bilge to ensure it captures residual moisture that settles.

• Secure your low-profile bilge water pickup(s) if necessary: Use zip ties or the stainless bracket to secure your low-profile bilge water pickup, if needed, to prevent shifting during usage or storage.

• Connect power and schedule the pump using the BILGE-B-DRY Mobile App

3. Monitor and maintain:

• If you are not in a freezing environment, check your bilge and BILGE-B-DRY pump periodically, if possible: If storing locally, inspect monthly for bilge saturation or signs of leaks.

• Replace your low-profile bilge water pickup filter material every 2-3 months after daily pump usage.

• If you have BILGE-B-DRY installed in a freezing environment, make sure to winterize your pump by running antifreeze through the pump for 30 seconds and then allowing the pump to run dry for 2 minutes.

4. Complement your bilge winterization with other moisture control products:

• Use desiccant products in your boat’s cabin and tight compartments for extra support to prevent mold in enclosed spaces.

• Ventilate your bilge and boat cabin when possible. If not shrink-wrapped, crack your boat’s hatches or install solar vents.

Learn more about BILGE-B-DRY Dry Bilge System at www.neptuniansky.com and enjoy top-notch customer service from a family-operated business!

BILGE-B-DRY Dual Pump 12vdc

$369.99$359.99

Buy Now